Showing 1–9 of 183 results

  • 1932-39 Packard V-12 Water Pump Pulley

    $522.50

    New cast iron water pump pulley for 1932 – 1939  Packard V12. Fully machined and ready to install. Please specify year of car when ordering so correct height pulley can be supplied. Packard part numbers: 1932: 203272, “Part of Motor Water Pump Shaft, Impeller and Fan Assembly”. 1933-34: 209067, “Part of Motor Water Pump Shaft,…

  • Packard V-12 Transmission Front Cluster Gear Bearing

    $520.00

    New double row ball bearing for Packard V-12  transmissions. Ready to install. Packard part number I-70288.

  • 1910-17 Packard Carburetor Venturi

    $467.50

    CNC Machined aluminum venturi nozzle for Packard carburetors. Used on carburetors with carburetor body P-5190 and may fit 1910 – 1917 carburetors. Material: Aluminum OAL: 2.660 ID of ends: 1.515, 1.00 Wall: .048 ID center: .730 OD large end: 1.734

  • AC Fuel Pump Rocker Arm & Pin, Packard 12

    $332.50

    AC mechanical fuel pump rocker arm with pin as used on 1935 – 1939 Packard 12.  Arm is a CNC machined replica of an original AC part. Pin supplied with the rocker arm is oversized and specially produced for use with our part. Rocker arm original part number AC-1521868. Rocker Arm: Material: 1018 Steel, heat…

  • Packard V-12 Water Pump Impeller

    $247.50

    Water pump impeller cast in bronze and fully machined to fit all Packard V-12 water pumps from 1933 – 1939. This impeller has one more blade than the early impellers, but will still work with early cars. Packard V-12 water pumps use 1/4 packing available separately.

  • 1/4 Pipe Thread Petcock for Packard V-12 Engine

    $205.00

    Bronze petcock for all V-12 Packard engine blocks. This is a duplicate of the original design, has a 1/4 pipe thread. Packard part number 203976, “Motor Cylinder Water Jacket Drain Cock”. Two required per car.

  • 1933-34 Packard V12 Water Pump Shaft, 10 OAL

    $198.00

    Water pump shaft for use on 1933 – 1934 Packard V-12. Made from 440-C stainless steel, hardened and ground to size. This shaft has excellent corrosion resistance and wears better than 302/304 stainless steel which cannot be hardened. This is the shorter version of our part number P-0022. ​Packard part number 209067, part of water…

  • 1935-37 Packard V-12 Water Pump Shaft, 11 OAL

    $198.00

    Water pump shaft to fit 1935 – 1937 Packard V-12 Series 1207, 1208, 1407, 1408, 1506, 1507, 1508. This 11″ OAL shaft is produced from 17-4 precipitation hardening steel and is ground to size after heat treat. This hardened stainless shaft has very good corrosion resistance and wears much better than 304 or 302 stainless…

  • 1938-39 Packard V-12 Water Pump Shaft, 10 5/8 OAL

    $198.00

    Water pump shaft to fit 1938 and 1939 Packard V-12. This 10 5/8 OAL shaft is produced from 17-4 precipitation hardening steel and is ground to size after heat treat. This hardened stainless shaft has very good corrosion resistance and wears much better than 304 or 302 stainless which cannot be hardened. Packard V-12 water…