-

$100.00
Yoke for the vacuum valve actuating rod on cars using Bragg Kliesrath Power Brake Boosters. Female end is made without threads. Threads to be drilled and tapped by purchaser. Different makes and models use different threads, all other details are identical. Packard part number 202912. Cadillac part number 881452. Cadillac thread is 1/4-28. OAL: 2.015…
-

$27.50
Brake tensioner plate for use on 1931 Cadillac V-12. For use on models 340, 345A, 353, 355A, 370A and 452A. Cadillac part number 872317, group 4.0240 “Cadillac lock for trunnion retainer”. Two required per car. Material: Spring steel Finish: Natural ID: .384 Thickness: .035
-

$18.00
Brake drum lock plate for use on 1930 – 1931 Cadillac V-8, V-12 and V-16. Length: 5.207 Width: .822 Hole DIA: .522 Thickness: .059
-

$16.50
Stepped screw set for the power brake booster on 1930 – 1931 Cadillac V-16. Finished in black oxide to prevent corrosion. Sold as a set of three. Material: 12L14 Finish: Black oxide Thread: 4-40 Thread length: .095 OAL: .312 Head: .221 OD x .090 long Length under head: .226 Shaft OD: .140
-

$15.00
Cadillac Brake Booster Washer Valve Material: Buna-N-Rubber Finish: Natural Thickness: 1/16 1/4 I.D. 5/8 O.D. Group# 4.4487 Part# 1096193 345C LaSalle 1933 355 B + C – 8 Cylinder Cadillac 1932-1933 370 A+B+C – 12 Cylinder Cadillac 1930-1933 452 A+B+C – 16 Cylinder Cadillac 1930-1933
-

$8.50
Flare nut for use on Cadillac V-12 5/16 vacuum lines. Specifically used on the lines from the power brake booster to the intake manifold. Material: Brass Finish: Natural Thread: 9/16-18 OAL: .945 Hex: 3/4 Tube end ID: .320 45′ Seat
-

$4.50
Roller bearing for the brake shaft on the backing plates of 1930 – 1931 Cadillac V-12 and V-16. Three lengths available: CAD-0163 .8125 OAL CAD-0164 1.125 OAL CAD-0165 (not pictured) 1.312 OAL
-

$4.50
Roller bearing for the brake shaft on the backing plates of 1930 – 1931 Cadillac V-12 and V-16. Three lengths available: CAD-0163 .8125 OAL CAD-0164 1.125 OAL CAD-0165 (not pictured) 1.312 OAL
-

$4.50
Roller bearing for the brake shaft on the backing plates of 1930 – 1931 Cadillac V-12 and V-16. Three lengths available: CAD-0163 .8125 OAL CAD-0164 1.125 OAL CAD-0165 (not pictured) 1.312 OAL