Showing all 8 results

  • Stewart Warner Tachometer Gear Shaft Assembly For 810 & 812 Cord

    $225.00

    Stewart Warner tachometer gear shaft assembly for Cord 810 and 812, shaft and gear assembly. Material: Brass Finish: Natural Length: 1.891 O.D. .374  

  • Cord 810 812 Fuel & Brake Line Clip

    $11.00

    Cord 810 / 812 fuel and brake line clip. Specifically noted in the Cord parts book for use on “Fuel Line to the Dash”, but is also used as a brake line clip. Cord part number 8579. Material: Steel Finish: Natural Hole DIA: .280 Width: .787 Length: 1.506

  • 1/2 Inverted Flare Nut, Auburn Cord

    $9.50

    1/2 Inverted flare nut made to 1930’s specifications. For use on brake, fuel and vacuum lines on Auburn and Cord 810/812. Also for use on other automobiles of the era. Auburn & Cord part number 12S707. Material: 12L14 Steel Finish: Cadmium Thread: 3/4-18 x .500 OAL: .906 Hex: 3/4 Hex height: .411 ID: .515

  • 5/16 Inverted Flare Nut, Auburn Cord

    $8.50

    5/16 Inverted flare nut made to 1930’s specifications. For use on brake, fuel and vacuum lines on Auburn and Cord 810/812. Also for use on other automobiles of the era. Auburn & Cord part numbers 12S704, 12S704A6 and 12S724A6. Material: 12L14 Steel Finish: Cadmium Thread: 1/2-20 x .427 OAL: .653 Hex: .500 Hex height: .233…

  • 3/8 Inverted Flare Nut, Auburn Cord

    $8.50

    3/8 Inverted flare nut made to 1930’s specifications. For use on brake, fuel and vacuum lines on Auburn and Cord 810/812. Also for use on other automobiles of the era. Auburn & Cord part number 12S705. Material: 12L14 Steel Finish: Cadmium Thread: 5/8-18 x .400 OAL: .782 Hex: 5/8 Hex height: .400 ID: .382

  • 1/4 Inverted Flare Nut, Auburn Cord

    $8.50

    1/4 Inverted flare nut made to 1930’s specifications. For use on brake, fuel and vacuum lines on Auburn and Cord 810/812. Also for use on other automobiles of the era. Auburn and Cord part numbers R10359, 12S703A6, 12S703. Material: 12L14 Steel Finish: Cadmium Thread: 7/16-24 x .325 OAL: .592 Hex: .437 ID: .257

  • 1/8 Inverted Flare Nut, Auburn Cord

    $7.00

    1/8 Inverted flare nut made to 1930’s specifications. For use on brake, fuel and vacuum lines on Auburn and Cord 810/812. Also for use on other automobiles of the era. Auburn and Cord part number 12S701. Material: 12L14 Steel Finish: Cadmium Thread: 5/16-28 Thread length: .278 OAL: .500 Hex: 5/16 Hex height: .225 ID: .134

  • 3/16 Inverted Flare Nut, Auburn Cord

    $7.00

    3/16 Inverted flare nut made to 1930’s specifications. For use on brake, fuel and vacuum lines on Auburn and Cord 810/812. Also for use on other automobiles of the era. Material: 12L14 Steel Finish: Cadmium Thread: 3/8-24 x .350 OAL: .560 Hex: 3/8 Hex height: .213 ID: .200