Showing 1–9 of 34 results
-

$82.50
Insulator block used between carburetor and intake manifold on cars requiring use of a spacer. Fits DD-3 and EE-3 carburetors with 6 mounting holes. Available in two thicknesses: 1/2 inch or 1/4. For use on DD-3 carburetors as installed on: 1930-33 Hupmobile 366 H, U 1931 Chrysler CG; 1932 CH, CL 1931 Lincoln V8; 1932…
-

$82.50
Insulator block used between the carburetor and intake manifold on cars requiring a spacer. Fits Stromberg DDR-3 and EE-3 carburetors with four mounting holes. Available in two thicknesses: 1/2 inch or 1/4. For use on DDR-3 carburetors as installed on 1932 Duesenberg and 1931 – 1933 Marmon. Material: Garolite Finish: Natural Length: 4.875 Width: 3.175…
-

$82.50
Insulator block used between carburetor and intake manifold on cars requiring use of a spacer. Fits DD-3 and EE-3 carburetors with 6 mounting holes. Available in two thicknesses: 1/2 inch or 1/4. For use on DD-3 carburetors as installed on: 1930-33 Hupmobile 366 H, U 1931 Chrysler CG; 1932 CH, CL 1931 Lincoln V8; 1932…
-

$82.50
Insulator block used between the carburetor and intake manifold on cars requiring a spacer. Fits Stromberg DDR-3 and EE-3 carburetors with four mounting holes. Available in two thicknesses: 1/2 inch or 1/4. For use on DDR-3 carburetors as installed on 1932 Duesenberg and 1931 – 1933 Marmon. Material: Garolite Finish: Natural Length: 4.875 Width: 3.175…
-

$66.00
Throttle shaft for Stromberg DDR-3 carburetors. For use on DDR-3 carburetors as installed on 1932 Duesenberg and 1931 – 1933 Marmon. Two required per carburetor used in Stromberg assembly numbers P-16102 and P-16103, “Left Throttle Gear and Stem”. Material: Brass Finish: Natural Thread: 4-40 OAL: 4.260 OD: .313 Slot: 2.100 x .072 Holes: .142 Hole…
-

$60.50
Stromberg carburetor seat and needle with Viton tip. For use in UU-2, UU-3, DD3 and many other Stromberg carburetors. Stromberg part number P-17413. Needle OAL: .960 DIA: 9/32 Seat OAL: 1 3/8 Hex: 1/2 Thread: 5/16-24
-

$44.00
Stromberg DDR-3 carburetor needle and seat. Used on Marmon V-16, Chrysler Imperial, Lincoln and other makes. Material: Brass, stainless steel, viton Seat thread: 1/2-24 Seat hex: 5/8
-

$44.00
Pump lever spring for Stromberg DDR-3 carburetors as used on 1931 – 1933 Marmon and Duesenberg Model J. Stromberg part number P-15392. Material: Spring steel Length: 1.484 Width: .968 Thickness: .030 Width of steel: .250
-

$25.00
Stromberg DDR-3 carburetor idle needle. Two different length needles were used, please check the OAL of your part before ordering. Stromberg part number P-15396L. Material: Brass Finish: Natural Thread: 1/4-24 Needle: .125 OAL: 1.1875