Showing 1–9 of 55 results
Repair kit for Stromberg EE-3 carburetors. Kit consists of: STR-0003 Tag STR-0017-A Needle & seat STR-0019 3/4″ Accelerator pump piston STR-0020 Air horn gasket STR-0021 Main body gasket STR-0074 Accelerator pump check valve STR-0097 Main discharge jet gasket (2) STR-0098 Float needle seat gasket STR-0100 Screw-fulcrum float lever gasket
Duesenberg Model J intake air cleaner elbow. For EE-3 Stromberg carburetor.
Stromberg EE-3 carburetor pump lever housing. Laser cut from 22 gauge steel. For use on Packard, Pierce Arrow Stutz, Chrysler, Duesenberg and others. Stromberg part number P-17442. Material: Steel Finish: Natural Width: 2.500 Height: 2.00 Depth: 5/8 Thickness: 22G
Stromberg EE-3 down draft carburetor spacer. Made from thick thermally stable bakelite. Material: Bakelite Finish: Natural Length: 4 7/8 Width: 3 5/32 Bore DIA: 1.716 Mounting stud ID: .363
Insulator block used between the carburetor and intake manifold on cars requiring a spacer. Fits Stromberg DDR-3 and EE-3 carburetors with four mounting holes. Available in two thicknesses: 1/2 inch or 1/4. For use on DDR-3 carburetors as installed on 1932 Duesenberg and 1931 – 1933 Marmon. Material: Garolite Finish: Natural Length: 4.875 Width: 3.175…
Insulator block used between the carburetor and intake manifold on cars requiring a spacer. Fits Stromberg DDR-3 and EE-3 carburetors with four mounting holes. Available in two thicknesses: 1/2 inch or 1/4. For use on DDR-3 carburetors as installed on 1932 Duesenberg and 1931 – 1933 Marmon. Material: Garolite Finish: Natural Length: 4.875 Width: 3.175…
Steel cover for the accelerator pump lever for Stromberg EE-3 carburetors. For use on: 1934-35 Chrysler CW 1934-37 Duesenberg J, SJ 1930-31 Hupmobile C and 1931 H, U 1932 Packard 905, 906 1933 Packard 1005, 1006, Twelve 1934 Packard 1107, 1108 1935 Packard 1207, 1208 1936 Packard 1407, 1408 1937 Packard 1506, 1507, 1508, Twelve…
Duesenberg Model J carburetor throttle lever. Material: CRS Finish: Grey nickel Hole ID: .187 and .465 OAL: 2.745 Thickness: .085
New leather accelerator pump, piston and shaft for Stromberg EE-3 carburetors. Fits EE-3 carburetors used in many cars including Duesenberg, Hupmobile, Packard and Stutz. Stromberg part #P17448. Piston DIA: .750 (large)
