Showing all 7 results

  • 1930-36 Packard 8 Main Bearing Stud, Short

    $14.00

    Rear crankshaft bearing cap stud for use on 1930 – 1936 Packard Eight. Packard part number 158687, “Motor Crankshaft Bearing Cap Stud, Rear”. Material: 4140 Steel, heat treat grade 8 Finish: Natural Thread: 1/2-20, 1/2-13 Thread length: 1/2-20 .915; 1/2-13 1.4375 Mid: 1.8195 OAL: 4.172 OD: .500

  • 1930-36 Packard 8 Main Bearing Stud, Long

    $14.00

    Crankshaft bearing cap stud for use on 1930 – 1936 Packard Eight. Packard part number 158686, “Motor Crankshaft Bearing Cap Stud”. Material: 4140 Steel, heat treat grade 8 Finish: Natural Thread: 1/2-20, 1/2-13 Thread length: 1/2-13 1.450; 1/2-20 1.075 Mid: 2.420 OAL: 4.945 OD: .500

  • 1930-33 Chrysler Imperial Cylinder Head Stud

    $14.00

    Cylinder head stud to fit 1930 – 1933 Chrysler Imperial. Made from heat treated 4140 steel. Has 1/2-20 thread on one end and 1/2-13 thread on the other, 3 3/4 OAL.

  • Packard V-12 Cylinder Head Stud, Medium

    $10.50

    1/2-20 x 2 7/8 cylinder head stud for Packard V-12 1207/08 and 1407/08. Made from heat treated 4140 steel and has black oxide finish to protect from rust. For use with iron or aluminum heads. Packard part number 216308. Fourteen required per car on iron heads.  Aluminum heads require 28.

  • Packard V-12 Cylinder Head Stud, Long

    $10.50

    1/2-20 x 4 cylinder head stud for Packard V-12 1207/08 and 1407/08. Made from heat treated 4140 steel and has black oxide finish to protect from rust. For use on iron or aluminum heads.  Packard part number 216143, “Motor Cylinder Head Stud – Long”. Fourteen required per car on iron and aluminum heads.

  • Packard V-12 Generator Mounting Stud in Timing Cover

    $10.50

    Packard V-12 engine studs made from heat treated 4140 steel. Domed end is polished and entire stud is nickel plated as original. Heat treated steel studs are stronger and less susceptible to galling and stretching than stainless studs, especially when used with stainless nuts. For Packard V-12 1207/08, 1407/08. Packard part number 221042, “Generator Mounting…

  • Packard V-12 Cylinder Head Stud, Short

    $9.50

    1/2-20 x 2 1/4 cylinder head stud for Packard V-12 1207/08 and 1407/08. Made from heat treated 4140 steel and has black oxide finish to protect from rust. For use on iron heads only – short stud not used on aluminum heads. Packard part number 216142. Fourteen required per car on iron heads.