Showing 1–9 of 41 results

  • Schebler S Carburetor Bowl

    $440.00

    Cast aluminum carburetor bowl used on Duesenberg Model J. For use on Schebler carburetor model SX-368 / SX-436. Schebler part number SV-247A. Material: Aluminum Finish: Natural Thread: 7/16-20 Length: 8.125 Width: 4.078 Height: 4.4156 Wall: .125 ID at top: .890

  • Schebler Carburetor Float, 3″ OD

    $328.50

    Float for early large bowl Schebler carburetors. Sealed urethane foam with brass wear surface. Ready to install. Material: Urethane foam Finish: Sealed OD: 3.000 ID: .250 Height: 2.000

  • Carburetor Needle Valve Assembly (Schebler)

    $252.50

    Carburetor Needle Valve Assembly (Schebler) Material: Brass Finish: Natural Applications: SX387    1  1/4 Duplex    

  • Schebler S Carburetor Float Pivot Arm

    $137.50

    Schebler Model S carburetor float pivot arm for two barrel updraft carburetors. Precision laser cut from brass. Fits SX-389 carburetor used on J Duesenberg. Material: Brass Finish: Natural Pivot pin ID: .195 Needle tang depth: .125 Needle pin tang width: .089 Float width at end: 1 3/4 Thickness: .050

  • Schebler S Carburetor Needle Valve Jet Sleeve

    $137.50

    Brass jet sleeve for needle valves as used on all diecast Schebler Model S carburetors with adjustable jet tubes. This sleeve may work with brass carburetors, but would require re-calibration. Schebler part number S-1700. Material: Brass Finish: Natural Thread: .278 -24 Thread length: 5/8 OAL: 2.783 Splines: 22 splines .495 x 5/16 ID: .142 to…

  • Schebler S Carburetor Float – 1 3/4 x 1 15/16

    $137.50

    New brass float to fit Schebler brass, iron and diecast single and duplex Model S Carburetors. Float size: 1 3/4 OD x 1 15/16 long. Fits many cars and trucks of the 1920’s and 1930’s including: Ahrens Fox American LaFrance Auburn Bugatti Chrysler Cord Duesenberg Dupont Elcar Graham Paige Jordan Kermath Kissel Locomobile Marmon Peerless…

  • Schebler S Carburetor Air Bend

    $115.50

    Air bend for Model S Schebler updraft carburetors. Perfect bronze reproduction, cadmium plated. Measures 2 1/2″ x 1 1/2″ with open end threaded to screw on to the bottom of the carburetor. Internal thread is 1 1/16-20.

  • Schebler S Carburetor Repair Kit

    $110.00

    Schebler S Carburetor Repair Kit, for J-990 carburetor. 1  1/2 Duplex Applications: Updraft equipped Duesenberg J, SX346, SX348, SX354, SX389, SX425, SX430, SX431  

  • Schebler S Carburetor Float – 1 3/4″ x 1 1/4″

    $87.00

    New brass float to fit Schebler brass, iron and diecast single and duplex Model S Carburetors. Float size: 1 3/4 OD x 1 1/4 long. Fits many cars and trucks of the 1920’s and 1930’s including: Ahrens Fox American LaFrance Auburn Bugatti Chrysler Cord Duesenberg Dupont Elcar Graham Paige Jordan Kermath Kissel Locomobile Marmon Peerless…