Showing 1–9 of 21 results

  • 1930 Packard 8 Water Pump Shaft

    $192.50

    Stainless steel water pump shaft for 1930 Packard Standard Eight, Series 700. Heat treated and ground to within .0005 tolerances, our stainless steel shafts are superior to others made from 303/304 stainless which cannot be hardened. Packard part number 173543. Material: 440-C Stainless steel Heat treat: Maximum hardness Finish: Natural Thread: 1/2-20 Thread length: .500…

  • 1931-32 Packard 8 Water Pump Shaft

    $192.50

    For all 8 cylinder Packards, fits 1931-1932 Super 8 Series 1003/4 and 1103 – 1405. May also fit other pumps. Made from precipitation hardened stainless steel, heat-treated and ground. This is much superior to stainless steel shafts made from 302 and 304 stainless steel which cannot be hardened and remains soft making it prone to…

  • 1935-38 Packard Eight Vacuum Flex Hose

    $154.00

    Vacuum flex hose for use on 1935 – 1938 Packard Eight. Duplicate of original hose including grey nickel ends. For use on Series 1200-1205, 1400-1405, 1500-1502 and 1603-1605. Material: Cloth and plastic hose, brass ends Finish: Grey nickel Thread: 1/8-NPT male, 5/16-20 flare female OAL: 9 7/8 Hex: 9/16 male, 5/8 female

  • 1935-38 Packard Eight Oil Pressure Flex Hose

    $154.00

    Oil pressure flex hose for use on 1935 – 1938 Packard Eight. Duplicate of original hose including grey nickel ends. For use on Series 1200 – 1205, 1400 – 1405, 1500 – 1502 and 1603 – 1605. Packard part number 120917, “Motor crankcase oil pressure gauge connection”. Material: Cloth/plastic hose, brass Finish: Grey nickel Thread:…

  • 1935-36 Packard Super Eight Fuel Pump Inlet Tube Assembly

    $154.00

    1935 – 1936 Packard Super Eight fuel pump inlet tube assembly. Reproduction of original braided hose. Fixed male end, swivel female end. Packard part number: 228754. Material: Braided bronze hose, brass ends Finish: Grey nickel Thread: Male 1/8-27 NPT; Female 1/2-20 NF OAL: 9.250

  • 1932-34 Packard 8 V12 Kick Shackle Pin

    $93.50

    Kick shackle pin for use on 1932 – 1934 Packard 8 and V-12. Material: SAE 8620 steel, carburized and hardened, ground finish

  • Packard Super 8 Water Pump Packing Nut

    $65.00

    Packard Super 8 Water Pump Packing Nut Material: 303 Stainless Steel Finish: Natural Thread: 1 1/4-18 11/16 Thru Hole 1 5/16 Hex 11/16 Overall Length Packard# 183795 Models: 1001,1002,1003,1004,1100,1101,1102,1103,1104,1105,1200,1201,1202,1203,1204,1205,1400,1401,1402,1403,1404,1405  

  • 1931-32 Packard Super 8 Fuel Pump Rod

    $58.00

    New heat-treated tool steel push rod fits Packard 1931-32 Super 8’s. Also for use with early Packard Straight 8’s using a mechanical fuel pump mounted on the timing cover. For use on the following Packard series: 1203, 1204, 1205, 1400, 1401, 1402, 1403, 1404, 1405, 1500, 1501, 1502, 1603, 1604, 1605. Packard part number 223132,…

  • Packard Super 8 Choke to Carburetor Connecting Rod

    $49.50

    Steel connecting rod linking the automatic choke and carburetor on 1933 – 1934 Packard Super 8 equipped with Stromberg EE-22 carburetor. Used in conjunction with ball joint, our part number P-0149. Stromberg part number P-18734. Packard part number 210195. Material: Steel Finish: Natural Thread: 8-32 Thread length: .656 OAL: 8.750 Rod OD: .156 OD at…