Showing 1–9 of 10 results
Stromberg EE-23 carburetor seat and needle with Viton tip. Needle is made from stainless steel and has a high strength Viton rubber tip. Fits Stromberg EE-23 carburetors as used many cars of the era including: Hupmobile 6-A & 8-M 1935 Packard 1200, 1201, 1202, 1203, 1204, 1205 1936 Packard 1400, 1401, 1402, 1403, 1404, 1405…
Accelerator fuel pump inlet check valve for Stromberg EE-3 carburetors as used on Packard V-12 and others. Also used in EE-22 and EE-23 Stromberg carburetor assemblies. Stromberg part number P-16990, “Check valve for pump inlet”. Material: Brass, copper, micarta Finish: Natural Thread: 7/16-24 Thread length: .125 OAL: .531 Hex: .468 ID: .142 For use on…
Stromberg carburetor metering jet wrench. The hole is .218 wide and .281 long. This wrench will fit the larger Stromberg jets with a 7/16-24 thread. For use with jets P-19442, P-17004 and P-22660 as commonly used on mid 1930’s through 1955 Packard, Cadillac, LaSalle, Buick, Dodge, Studebaker, Nash, Rolls Royce and others. For use with…
New tag with black background for installation on Stromberg carburetors used on French cars such as Bugatti and others.
Brass slotted plug with 10-32 thread for the pump check valve channel on Stromberg carburetors. This plug was used on most Stromberg carburetors from Model O through the EE series. STR-0006 brass or STR-0006-N nickel plated. Stromberg part number P-7098.
Brass slotted plug with 5/16-24 thread for the pump discharge nozzle channel on Stromberg carburetors. This plug was used on most Stromberg carburetors from Model O through the EE series. STR-0005 brass or STR-0005-N nickel plated. Stromberg part number P-6406 and P-6402.
Stromberg EE-23 carburetor automatic choke cam return spring. For use on: 1934 -1935 LaSalle, 1935 – 1936 Packard Eight, 1935 – 1936 Packard Super Eight, 1937 Packard Super Eight, 1934 Reo Royale. Stromberg part number P-19104 Material: Steel Finish: Natural OAL: 7/8 OD: .124 Wire DIA: .014 Note: Spring is sold individually, other parts shown…
Brass slotted plug with 10-32 thread for the pump check valve channel on Stromberg carburetors. This plug was used on most Stromberg carburetors from Model O through the EE series. STR-0006 brass or STR-0006-N nickel plated. Stromberg part number P-7098.
Brass slotted plug with 5/16-24 thread for the pump discharge nozzle channel on Stromberg carburetors. This plug was used on most Stromberg carburetors from Model O through the EE series. STR-0005 brass or STR-0005-N nickel plated. Stromberg part number P-6406 and P-6402.
